MODEL A FORD
Engine Parts


ENGINE PAINT -- Specially formulated heat resistant engine paint. Comes in either a spray can or a one quart can which can be either brushed on or used in a spray.
 

M-200         Spray Can         ea. 6.50
 

M-202         Pint Can         ea. 12.50


ENGINE GASKET SET -- Set includes all gaskets needed for the engine including the copper head gasket.
Quality. U.S.A. made.


A-6008-C         1928-31         set 41.95


TIMING GEAR SIDE COVER GASKET -- Gasket fits on the side timing gear cover.


A-6018         1928-32         ea. .95


TIMING COVER BOLTS -- Dome head style bolts for front timing cover.


A-6019-MB         1928-31         set 3.50


FRONT TIMING COVER GASKET
 

B-6020         1928-34         ea. .95


TIMING PIN


B-6023         1928-34         ea. 3.25


  FRONT MOTOR MOUNT SET -- Motor mount set includes: 3 springs, brass bushing, fiber washer & castle nut.


A-6031-S         1928-31 (8 pieces.)         set 6.95


FRONT MOTOR YOKE


A-6030-A        ea.  29.95


FRONT MOTOR MOUNT BRASS BUSHINGS


A-6034         1928-31         ea. 1.95


COPPER HEAD GASKET


A-6051-C         1928-31         ea. 24.95


CYLINDER HEAD NUT COVERS "CHROME" -- The chrome plated cylinder head nut covers to dress up your engine

                                  compartment.


CNC-6062-AS         1928-48 (Set of 14)        set 9.95
 


CYLINDER HEAD WASHERS -- Original style cadmium plated washer.


B-6063         1928-34         ea. .30
 


CYLINDER HEAD NUTS -- Set of 14 Original style cadmium plated head nuts.


A-6064-S         1928-34         set 5.20


HEAD STUD AND NUT SET -- Stud and nut set to bolt on the head.


A-6064-66         1928-32 (28 pieces.)         set 22.95


CYLINDER HEAD STUDS - MADE IN U.S.A.
 

A-6066     3 1/2" ( l2 required)         ea. 1.20
 

A-6067     5 23/32" ( 2 required)         ea. 1.75


PISTONS - U.S.A. -- Superior quality pistons come complete with fitted pins and are the Lock type. (set of 4)


BB-6108-A         Standard     set 110.00


BB-6108-B         .020         set 110.00


BB-6108-C         .030         set 110.00


BB-6108-D         .040         set 110.00


BB-6108-E         .060         set 110.00


BB-6108-F         .080         set 110.00


BB-6108-G         .100         set 110.00


BB-6108-H         .125         set 110.00


WRIST PIN BUSHING - One needed per rod, for the end lock wrist pin.


B-6207         1928-31         ea. 2.25


PISTON RINGS-U.S.A. -- New piston rings made in the U.S.A.
 

B-6149-A         Standard     set 38.95
 

B-6149-B         .020         set 38.95
 

B-6149-C         .030         set 38.95
 

B-6149-D         .040         set 38.95
 

B-6149-E         .060         set 38.95
 

B-6149-F         .080         set 29.95
 

B-6149-G        .100          set 38.95
 

B-6149-H         .125         set 38.95
 


PISTON RING COMPRESSOR


X-6151         All Models         ea. 6.95
 


CARBON SCRAPER


X-6.52         All Models         ea. 4.95


PISTON PIN SETS - U.S.A. -- High quality pins for the end lock pistons.


B-6135-A         Standard         set 21.95
 

B-6135-B         .003         set 21.95
 

B-6135-C         .005         set 21.95
 

B-6135-D         .010         set 21.95


ROD SHIM SET -- Laminated shims for the rods.


B-6220     1928-34     set 7.95


CAMSHAFT DOWEL PINS


B-6253     1928-31     pr. 3.20


FIBER TIMING GEAR -- The fiber timing gear that fits on the
camshaft. When replacing only the timing gear use an oversize.


B-6256-A     1928-34 Std.     ea. 38.00

B-6256-B     1928-34 .003     ea. 38.00

B-6256-C     1928-34 .005     ea. 38.00


CAMSHAFT NUT -- A high quality camshaft nut.

B-6259     1928-34     ea. 5.95


CAMSHAFT THRUST PLUNGER -- Camshaft plunger and spring keeps the
tension between the camshaft and the timing cover.

B-6275/76-S     1928-34     ea. 3.95


CRANKSHAFT TIMING GEAR -- Steal crankshaft gear that drives the fiber gear.

B-6306     1928-34     ea. 14.95

A-6307     1928-31 Gear Key     ea. 2.25


OIL SLINGER -- Oil slinger fits on front of crank shaft.

B-6310     1928-34     ea. 3.65


CRANKSHAFT PULLEY -- Quality cast steel pulley. The one piece is original type and the two piece is so you
can change the pulley without removing the radiator.

A-6312-A     1928-31 2 piece     ea. 30.95

A-6312-B     1928-31 1 piece     ea. 32.50



RATCHET NUT - MADE IN U.S.A. -- Special nut used to hold the pulley.

B-6319     1928-38     ea. 12.95



OIL DRAIN TUBE -- Cadmium rear main bearing oil drain tube.

A-6328-A     1928-29 5/16"     ea. 3.50

A-6328-B     1930-31    ea. 4.25



REAR MAIN OIL SEAL -- Die cast seal fits in the block.

A-6335     1928-31     ea. 13.95

B-6335     1932-34 4W     ea. 25.00



REAR MAIN OIL SEAL "NEOPRENE" -- Seal requires slight machining on the crankshaft to install.

A-6335-NP     1928-31     ea. 7.95

B-6335-NP     1932-34 B&C     ea. 8.95


MAIN BEARING SHIM SET -- Two laminated shims are needed for the rear main and four for the center and the
front main bearings.


A-6340/46     1928-31     set 7.95

B-6340-5     1932-34     set 8.95


REAR MAIN BEARING BOLT
 

B-6344     1928-32     ea. 2.75


FLYWHEEL BOLT SET -- The special bolt with a hole in the head for a safety wire lock.


B-6376     1928-48     set 7.00


FLYWHEEL HOUSING TO BLOCK BOLTS --  4 bolts with drilled heads & 2 bolts with Lock washers for the throttle linkage.


A-6378-MB     1928-31     set 4.50


CLUTCH HOUSING TO FLYWHEEL HOUSING BOLTS -- Set of 11 bolts and lock washers.

B-6380-MB     1928-31     set 4.50


FLYWHEEL RING GEAR -- A heavy duty reproduction ready to install.

A-6384     1928-48     ea. 31.95


FLYWHEEL HOUSING GASKET
 

B-6396     1928-34     ea. 1.50


FLYWHEEL DOWEL PIN
 

B-6397     1928-34     ea. .75


FLYWHEEL HOUSING DUST COVER BOLTS


B-6398-MB     1928-31 set of 3     set 1.00


FLYWHEEL SHIM  -- Shim between the flywheel housing and block.


B-6400     1928-34     pr. 1.00


ADJUSTABLE TAPPETS -- These are the adjustable nut lock style.

B-6500-M     1928-34     set 72.00


VALVE GUIDE TOOL -- Special tool used to remove the valve guides.

X-6500-RT     1928-34     ea. 8.95


INTAKE AND EXHAUST VALVES -- High quality U.S.A. made valves for longer life.    

B-6505-SS    1928-34  Stainless Steel     ea. 12.95


VALVE GUIDES -- High quality split style valve guide.

B-6510     1928-34     pr. 8.50


VALVE SPRINGS -- New springs ready to be installed.

B-6513     1932-34     ea. 1.10


VALVE SPRING KEEPER -- Steel keeper for the valve springs.

B-6514     1932--34 4 cyl.     ea. 1.95


VALVE COVER GASKET -- Fix those oil leaks and replace that old
gasket with a brand new one.

A-6521     1928-31     ea. 1.50

B-6521 -B     1932-34     ea. 7.95


OIL PUMP DRIVE GEAR -- A high quality U.S.A. drive gear.


B-6551     ea. 29.95


OIL PUMP DRIVE GEAR SLEEVE
 

B-6561     1932-34     ea. 4.50


DISTRIBUTOR DRIVE SPRING
 

B-6570     1928-34     ea. 1.50


OIL PUMP REPAIR KIT -- The repair kit includes all of the parts
needed to rebuild the oil pump.

A-6600-RK     1932-34     kit 29.95


OIL PUMP SPRING RETAINING PLATE -- Holds oil pump spring to the pump.

A-6618     1928-34     ea . 1.75



OIL PUMP RETAINER SPRING -- Spring fits on bottom of oil pump.

A-6620     1932-34     ea. 1.25



OIL PUMP SCREEN GASKET

 B-6626     1928-34     ea. .75


OIL RETURN PIPE GASKETS -- Hard fiber that will swell tight with use.

A-6648     1928-31     set 2.00


OIL PIPE MOUNTING BOLT SET -- Includes the special copper washers.

A-6648-MB     1928-31     set 1.75


OIL PAN & VALVE COVER BOLTS --  Set of 30 black oxide finish bolts.

A-6676/6520     1928-31     set 5.00


PACKING -- Timing gear front cover plate packing.

A-6700     1928-31     ea. 2.25


OIL PAN DRAIN PLUG

B-673O     1932-38     ea. 2.25


COPPER DRAIN PLUG GASKET

B-6734     1932-38     ea. .65

B6734-C     1932-38 Copper     ea. .95



OIL DIP STICK -- Original style cadmium plated dip stick.

B-6750     1932 4 cyl     ea. 2.95


OIL FILLER TUBE WITH BAFFLES -- Brand new tube and baffle ready to install.

A-6763     1928-31     ea. 12.95


OIL FILLER CAP --  Brand new authentic style oil cap.

A-6766-A     1928-31 Cadmium     ea. 4.95

A-6766-C     1928-31 Chrome     ea. 6.95
 


ENGINE PANS -- Stamped steel original style engine pans.


A-6775/76-S     1928-31     pr. 49.95


ENGINE PAN MOUNTING SET

A-6775-MB     1928-31 (18 pieces.)     set 2.95



OIL PAN GASKET SET

A-6781     1928-31     set 6.50

B-6781     1932-34 4 cyl     set 14.95


Back

Little Dearborn Parts, Inc   2424 University Avenue   Minneapolis, MN 55414
Toll Free: 1-888-282-2066   Phone: 612-331-2066   Fax: 612-331-3847
Copyright 2001 - Little Dearborn - All Rights Reserved