MODEL A FORD
Differential


DIFFERENTIAL DRAIN PLUG -- Used for both the fill and the drain plug.


A-4030         1928-48         ea.  1.20


REAR AXLE & U JOINT GASKET SET -- All gaskets needed for the axle and U-joint.


A-4035-S         1928-31(9 pieces)         set  6.95


REAR AXLE HOUSING BOLTS


A-4035-MB         1928-31         kit  9.50


600 WEIGHT GEAR OIL -- Special heavy duty type oil used in both the transmission & rear-end.


M-400         One Quart     ea.  9.50


RING & PINION GEAR -- Brand new heavy duty gears made in the U.S.A.


A-4209-A         1909-34 Great for normal driving (3:78 to 1)         ea.  450.00


A-4209-C         1909-34 High speed (3:54 to 1)                               ea. 385.00


DIFFERENTIAL BEARINGS -- Requires two in differential & two in drive shaft.


A-4221         1928-32         ea. 41.00


DIFFERENTIAL BEARING CUP -- Requires 2 cups for the differential.


A-4222         1928-32         ea. 25.00
 


REAR AXLE SHAFT -- Brand new heavy duty axle shafts.


A-4235         1928-32         ea. 350.00


AXLE SHIM -- Tightens loose wheel when hub is worn.


A-4235-SH         1909-48         pair  2.75


KNOCK OFF WHEEL PULLER -- Prevents damaging the axle threads.


A-4235-WP         1909-48         ea.  4.95


REAR AXLE NUTS & COTTER PINS -- Castle nuts to hold on rear hubs.


A-4242         1928-48         ea.  1.75


Text Box:  

AXLE KEYS -- It is a good idea to replace worn axle keys as they can cause costly damage to the axle.


A-4243     1928-48     ea. 1.25


REAR WHEEL OUTER HUB GASKET


B-1183     1928-48     ea. .95


  INNER AXLE AND DRIVE SHAFT SEAL -- Requires 2 for rear axles and 1 for the drive shaft.


A-4245     1928-48     ea. 2.95


  TORQUE TUBE TO HOUSING BOLTS -- Bolts mount the torque tube to rear end housing.


A-4505-M     B-1928-31     set 5.50


UNIVERSAL GASKET SET -- Gasket set needed for the U-Joint.


A-7090-GS     1928-31     set 2.50


UNIVERSAL HOUSING CLAMP BOLT & NUT SET


A-4520-MB     1928-31     set 9.50


 DRIVE SHAFT KEY


A-4606     1928-31     ea. 1.25


PINION BEARING CUP -- Double sided cup for use with pinion beatings.


A-4616     1928-32     ea. 58.95


PINION BEARING NUT -- The drive pinion gear beating lock nut.


A-4634     1928-32     ea. 3.95


PINION LOCK WASHER


B-4636     1928-32     ea. 2.95
 


DRIVE SHAFT BEARING -- The bearing used on the front of the drive shaft.


B-4645     1928-48     ea. 13.60


BEARING SLEEVE -- Fits drive shaft bearing at front of shaft by speedometer drive.


A-4655     1928-48     ea. 8.95
 


DRIVE SHAFT SEAL -- Requires 1 for the drive shaft.


A-4245     1928-48     ea. 2.95


SPEEDOMETER GEAR GASKET -- Fits on the speedometer gear and drive
shaft. May need more than one gasket for proper clearance.

B-17275     1928-48     ea. .70


SPEEDOMETER GEAR SNAP RING


B-17286     1928-48     ea. 1.00
 


THRUST WASHER -- Mounts on drive shaft next to speedometer drive gear.


B-17290     1928-48     ea. 2.25


RADIUS ROD MOUNTING BOLT SET -- Bolts mounts radius rod with nut and cotter pin.


A-4750-M     B-1928-32     set. 2.50


Back

Little Dearborn Parts, Inc   2424 University Avenue   Minneapolis, MN 55414
Toll Free: 1-888-282-2066   Phone: 612-331-2066   Fax: 612-331-3847
Copyright 2001 - Little Dearborn - All Rights Reserved